Dosing Distributors

MV-20: An oil+air-mixing valve with dosing in form of a block distributor. The dosing distributors are available with up to 8 lubricant outlets. The lubricant's dosage is adjustable from 0.01 to 0.16 cm³ per stroke for every lubricating point. Lubricant outlets which are not needed can be closed by fitting a special dosing screw into the dosing distributor. With this model, an air adjusting screw is inclusive. The screw regulates the amount of compressed air. If more than 8 lubricating points have to be supplied, an additional dosing distributor is necessary. However, compressed air has to be supplied to each valve seperately.

MV-50: Extends the dosage ranges and serves as supplement to MV-20 dosing distributors. The distributors allow for small dosages of 2 to 6 mm³. On the basis of autonomous ventilation the distributor ensures oil transportation free of blow holes to the dosing unit. Summarised, the dosing distributor offers the following advantages: Small dosages of 2 to 6 mm³, self-venting, expandeble with dosing unit MV-20, modular design. Other benefits are e.g. faster operation, high dosing accuracy and better safety.

 


SKF Dosing Distributor - MV-20 - oil+air - 5C to 80C

SKF Dosing Distributor - MV-20 - oil+air - 5C to 80C
  • Dosing distributor MV-20
  • Sealing: NBR or FPM
  • Actuation pressure, air: 3 to 10 bar
  • Actuation pressure, oil: 17 to 40 bar
  • Temperature range: 5°C to 80°C
  • Mounting position: any
MSRP 0,00 EUR net / piece
excl. 19 % VAT
Shipping time: 3-4 Weeks

SKF Dosing Distributor - MV-50 - oil+air - 40-200mm/s

SKF Dosing Distributor - MV-50 - oil+air - 40-200mm/s
  • Dosing distributor MV-50
  • Sealing: FPM
  • Actuation pressure, air: 3 to 10 bar
  • Actuation pressure, oil: 25 to 40 bar
  • Temperature range: 5°C to 80°C
  • Operating viscosity: 40-200 mm²/s
MSRP 0,00 EUR net / piece
excl. 19 % VAT
Shipping time: 3-4 Weeks
Show 1 to 2 (of in total 2 products) Sites:  1