Flow Monitors/Meters
.jpg)
.jpg)
.jpg)
.jpg)
Flow monitors/meters: The flow monitors/meters are for monitoring a continuous oil flow. The flow rate amounts to, depending on model, 0,5 cm³ to 14.000 cm³. Flow monitors are commonly used in forming machines or cylinder and compressor lubrications.
Flow sensor: The flow sensors are suitable for monitoring the oil flow from dosing point to lubrication point. The dosing only doeses a small amount of oil.
SKF Impulse generator SP/SFE 30/5
- Operating viscosity > 12 mm²/s
- Switching power: 10 watt for AC/DC
- Switching voltage: 24/48 volt
SKF Impulse generator SP/SFE 30/3003 ATEX
- Operating viscosity > 12 mm²/s
- Volume flow range: 0,1 to 50 cm³/min
- Switching power: 10 W for AC/DC
Vogel Flow sensor
- Operating pressure: max. 40 bar
- Temperature: +10°C to +50°C
- Nominal voltage: 24 V DC
Minimum meter HZ 3 - oil/diesel - from 0,180 l/h - factory-tested
- Minimum meter HZ 3
- Metering device for fuel oil EL and diesel
- Flow range: 0,18 l/h - 12 l/h
Minimum meter HZ 3RR - oil/diesel - from 0,18 l/h - with impulse generator
- Minimum meter HZ 3RR (factory-tested)
- Flow range: 0,18 l/h - 12 l/h
- Impulse generator: Reed contact with protective resistance
- Impulse: 1 impulse = 1 litre
Minimum meter HZ 5 - oil/diesel - from 0,7 l/h - factory-tested
- Minimum meter HZ5
- Metering device for fuel oil EL
- Flow range: 0,7 l/h - 40 l/h
Minimum meter HZ 5DR - from 0,7 l/h - LCD-display and impulse generator
- Minimum meter HZ 5DR factory-tested
- LCD digital display
- 6-digit LCD display
Minimum meter Hz 6 - oil - from 1 l/h - factory-tested
- Minimum meter HZ6 factory tested
- Metering device for fuel oil EL
- Flow range: 1 l/h - 60 l/h
Minimum meter HZ 6DR - from 1 l/h - LCD-display and impulse generator
- Minimum meter HZ 6DR factory-tested
- LCD digital display 6-digit
- Reed contact impulse generator: 1 impulse = 0,02 l
| Show 1 to 10 (of in total 10 products) | Sites: 1 |