Hand Pumps
These manual and pneumatic operated single piston pumps are designed for single line central lubrication system with piston distributors. They include the valve set needed for pressure relief and pressure control. The lubricant reservoirs made of transparent plastic are available in various sizes: 0,5; 1,0 or 1,7 litre. Model with/without level switch for monitoring the lubricant's minimum level.
Commissioning
Fill the reservoir with lubricant (POE with oil, PFE with semi-fluid grease) and activate the pump in intervals of 2-3 seconds until lubricant leaks from all lubricating points. The well installed system vents itself during this. The ventilation process is favoured by:
- Opening the main pipeline's ends until oil or grease emits bubble-free
- Filling of long pipes - especially of distributor points with small dosages - before connecting to the lubricating point
Maintenance
Control oil/grease level and refill reservoir timely. Use lubricant according to information from the machine's manufacturer. Always refill oil with sieve filter. Control all pipe connections for tightness after long machine operation time as well as activating the pump and controlling the function of every lubricating point.
SKF Oil hand pump POE 15
- Reservoir 0,5, 1,0 and 1,7 litre
- Flow rate: 15 cm³/stroke
- Pressure: max. 30 bar
- Medium: Oil
- Over pressure valve
SKF Semi-fluid grease hand pump PFE 15
- Reservoir 0,5, 1,0 and 1,7 litre
- Flow rate: 15 cm³/stroke
- Pressure: max. 30 bar
- Medium: Semi-fluid grease
- Over pressure valve
Vogel Single circuit piston pump PF23-2
- Single circuit piston pump PF23-2
- For multi-purpose grease (grease class II)
- Reservoir: 1,5 kg
- Dosage: 2,5 cm³ per stroke
Hand pump LP5 for oil
- Hand pump LP5
- For oil
- Reservoir: 0,475 litre
- Dosage: 1 to 5 cm³ per stroke
- Max. pressure: 5 bar
Hand pump 2534 for grease
- Hand pump 2534
- For grease (grease class II)
- Reservoir: 1 kg
- Dosage: 1,5 cm³/stroke
- Max. pressure: 300 bar
Hand pump 2534-Ö for oil
- Hand pump 2534-Ö
- For oil
- Reservoir: 1 kg
- Dosage: 1,5 cm³/stroke
- Max. pressure: 300 bar
Single circuit hand pump LP-6
- Single circuit hand pump LP-6
- For oil
- Reservoir: 0,6 litre
- Dosage: 6 cm³ per stroke
- Max. pressure: 20 bar
Hand pump 25057 for grease/oil
- Hand pump 25057
- For grease or oil (up to grease class II)
- Reservoir: 1 litre
- Dosage: 1 cm³/stroke
- Max. pressure: 210 bar
Hand pump 2532
- Hand pump 2532
- For oil or semi-fluid grease
- Reservoir: 1,2 litre
- Dosage: 6, 10 or 15 cm³ per stroke
- Max. pressure: 30 bar
Hand pump 2533
- Hand pump 2533
- For oil or semi-fluid grease
- Reservoir: 1,2 litre
- Dosage 6 or 10 cm³ per stroke
- Max. pressure: 30 bar
Hand pump wall mounting for 400g cartridges
- Hand pump
- For wall mounting
- For 400g cartridges
- Max. pressure: 350 bar
Manual lubrication with hand pump and distributor
- Hand pump
- With distributor
- For 400g cartridges
- Max. pressure: 350 bar
Hand pump LP100 for grease
- Hand pump LP100
- For grease (up to grease class II)
- Reservoir: 1,4 litre
- Dosage: 1 cm³ per stroke
- Max. pressure: 140 bar
Battery hand grease press 18 volt
- Battery hand grease press
- For 400g standard grease cartridges
- Max. pressure: 500 bar
- Voltage: 18 V (with rechargeable battery)
- On/Off-switch with LED
Battery grease press for 400g cartridges
- Battery grease press
- For 400g grease cartridge or 500g loose grease
- Max. pressure: 400 bar
- Max. flow rate: 100 ccm/min.
- Pipe, burst pressure: 1.650 bar
- Incl. 14.4 Li-Ion-battery (3.000 mAh)
Mounting clips for grease presses
- Mounting clip
- For grease presses (lever presses) and lubrication devices with pipe-Ø 56 mm
- For universal mounting to work place
- Packaging unit: 10 pc.
Mounting clips for grease presses - with magnetic mount
- Mounting clips with magnetic mount (permanent magnet)
- For grease presses (lever presses) and lubrication devices with pipe-Ø 56 mm
- For universal mounting to magnetic surfaces
- Packaging unit: 10 pc.
| Show 1 to 18 (of in total 18 products) | Sites: 1 |