Micro Pumps

Injection lubricators and micro pumps are suitable for the transportation and dosing of lubricant. The piston pump listed below allow lowest dosages. The unit's flow rate is partially adjustable. Injection lubricators and micro pumps are used for oil spraying (assembly tools), lubrication of small components (assembly support) and chain lubrication. One of the key features is the optimal dosage of every lubricating point, independent of pipe lengths or diameters. The supply of lubricant is carried out from a central reservoir, for injection lubricators also via central pressure oil pipe. The dosing elements are selectable individually or in groups. Injection and micro pumps are very environmentally friendly because no oil conterminates the exhaust air.

 


SKF Micro pump - injection lubricator - 1-port - 0,003-0,03 cm/stroke

SKF Micro pump - injection lubricator - 1-port - 0,003-0,03 cm/stroke
  • Max. flow rate: 0,003-0,03 cm³/stroke
  • Ambient temperature: -20°C to +80°C
  • Lubricant: Oil
  • Max. flow rate at 6 bar: 200 l/min
  • Basis unit for injection lubricators with reservoir
  • Pipe, diameter: 2,5 mm or 4 mm
MSRP from 73,90 EUR net / piece
excl. 19 % VAT
MSRP 87,94 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

SKF Micro pump - injection lubricator - 1-port - with lateral connection

SKF Micro pump - injection lubricator - 1-port - with lateral connection
  • Max. flow rate: 0,003-0,03 cm³/stroke
  • Ambient temperature: -20°C to +80°C
  • Lubricant: Oil
  • Operating viscosity: 10 to 1100 mm²/s
  • Sealing: NBR
  • Pipe, diameter: 2,5 mm
MSRP from 76,87 EUR net / piece
excl. 19 % VAT
MSRP 91,48 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

Vogel Micro pump - injection lubricator - 1-port - with reservoir

Vogel Micro pump - injection lubricator - 1-port - with reservoir
  • Injection lubricator with reservoir
  • Suitable for tool lubrication
  • Reservoir volume: 0,25 litre
  • Reservoir made of PA6-3-T
  • Operating viscosity: 10 to 1100 mm²/s
  • Compressed air connection: 3 to 10 bar
MSRP from 169,74 EUR net / piece
excl. 19 % VAT
MSRP 201,99 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

SKF Micro pump - injection lubricator - 3-port - 0,003-0,03 cm/stroke

SKF Micro pump - injection lubricator - 3-port - 0,003-0,03 cm/stroke
  • Ambient temperature: -20°C to +80°C
  • Lubricant: Oil
  • Operating viscosity: 10 to 1100 mm²/s
  • Pumping medium: Compressed air
  • Compressed air connection: 3 to 10 bar
  • Max. flow rate at 6 bar: 200 l/min
MSRP from 149,49 EUR net / piece
excl. 19 % VAT
MSRP 177,89 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

SKF Micro pump - injection lubricator - 3-port - with piston monitoring

SKF Micro pump - injection lubricator - 3-port - with piston monitoring
  • Ambient temperature: -20°C to +80°C
  • Lubricant: Oil
  • Operating viscosity: 10 to 1100 mm²/s
  • Pumping medium: Compressed air
  • Compressed air connection: 3 to 10 bar
  • Max. flow rate at 6 bar: 200 l/min
MSRP from 751,47 EUR net / piece
excl. 19 % VAT
MSRP 894,25 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

Vogel Micro pump - injection lubricator - 3-port - with reservoir

Vogel Micro pump - injection lubricator - 3-port - with reservoir
  • Injection lubricator with reservoir
  • Suitable for tool lubrication
  • Reservoir volume: 0,25 litre
  • Reservoir made of PA6-3-T
  • Operating viscosity: 10 to 1100 mm²/s
  • Compress air connection: 3 to 10 bar
MSRP 280,50 EUR net / piece
excl. 19 % VAT
MSRP 333,80 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

Vogel Micro pump on baseplate - 3-30 mm - 35 bar delivery pressure

Vogel Micro pump on baseplate - 3-30 mm - 35 bar delivery pressure
  • Micro pump mounted on baseplate
  • Mounting of 1- 4 pumps possible
  • Set dosing via setting rings: 3, 5, 10 and 30 mm
  • Frequency: max. 3 Hz
  • Max. delivery pressure: 35 bar
  • Pumping medium: Mineral oils without additives
MSRP 0,00 EUR net / piece
excl. 19 % VAT
MSRP 0,00 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

SKF Micro pump Vectoclub - 230V - 7 to 30 mm delivery volume

SKF Micro pump Vectoclub - 230V - 7 to 30 mm delivery volume
  • Flow rate adjustable: 7 to 30 mm
  • Air consumption: 400 l/min.
  • For viscosities of 10 to 400 mm/s
  • Operating temperature: 10C to 50C
  • With electronic pulse generator
  • Reservoir: 0,3 litre
MSRP 0,00 EUR net / piece
excl. 19 % VAT
MSRP 0,00 EUR gross / piece
incl. 19 % VAT
Shipping time: 1-3 Days

SKF Micro pump - integrated grease relubrication - 24 volt DC

SKF Micro pump - integrated grease relubrication - 24 volt DC
  • Integrated grease relubrication
  • Flow rate: 6 mm³/stroke
  • Operating temperature: +15°C to +50°C
  • Voltage: 24 volt DC
  • Lubricant: Grease, NLGI class 2
MSRP from 0,00 EUR net / piece
excl. 19 % VAT
MSRP 0,00 EUR gross / piece
incl. 19 % VAT
Shipping time: 1 Week

SKF Micro pump PVR-003-MOD - infinitely variable - 0-30 mm

SKF Micro pump PVR-003-MOD - infinitely variable - 0-30 mm
  • Dosage infinitely variable
  • Dosing volume: 0 - 30 mm³
  • Air pressure: 4 - 8 bar
  • Ambient temperature: -20°C to +70°C
  • Operating temperature: +10°C to +70°C
  • Delivery pressure: max. 35 bar
MSRP 0,00 EUR net / piece
excl. 19 % VAT
MSRP 0,00 EUR gross / piece
incl. 19 % VAT
Shipping time: 2 Weeks

SKF Coupling set - for injection lubricators

SKF Coupling set - for injection lubricators
  • Coupling set
  • For injection lubricators
  • Incl. 2 round sealing rings

 

MSRP 16,11 EUR net / piece
excl. 19 % VAT
MSRP 19,17 EUR gross / piece
incl. 19 % VAT
Shipping time: 1 Week
Show 1 to 11 (of in total 11 products) Sites:  1