Single Line Distributors

Piston distributors dose and distribute the oil transported by an intermittantly operated pump. Oil amounts for specific luricating points are determined by switchable dosing fittings. The dosage is stated on each dosing fitting. The coverage of the whole oil demand is then controllable via lubricating intervals.

According to quantitive requirements and space availabilities one can choose between four different distributor groups which differ by dosing range and overall size. The functional principle of all groups is the same, however there are structural differences. Multiple different distributor groups can be used inside one system.


SKF Distributor manifold for piston distributor M10

SKF Distributor manifold for piston distributor M10
  • Distributor manifold
  • For piston distributor M10
  • Deliverable versions: 1 to 24 ports
  • Thread connection: Input: M10x1, Output: M10x1

Single line distributor ZEM 342

Single line distributor ZEM 342
  • For oil and semi-fluid grease
  • Flow rate: 0,06ccm, 0,10ccm, 0,16ccm
  • Pump pressure: min. 15-45 bar
  • Sealing: Viton

Single line distributor ZEM 343

Single line distributor ZEM 343
  • For oil and semi-fluid grease
  • 3 x outflow with M8x1
  • Flow rate: 0,06ccm, 0,10ccm, 0,16ccm
  • Pump pressure: mix. 15-45 bar

Single line distributor ZEM 345

Single line distributor ZEM 345
  • For oil and semi-fluid grease
  • 5 x outflow with M8x1
  • Flow rate: 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm
  • Pump pressure: min. 15-45 bar

Single line distributor ZEM 351

Single line distributor ZEM 351
  • For oil and semi-fluid grease
  • 1 x outflow with M8x1
  • Flow rate: 0,20ccm, 0,40ccm, 0,60ccm
  • Pump pressure: min. 15-45 bar

Single line distributor ZEM 352

Single line distributor ZEM 352
  • For oil and semi-fluid grease
  • 2 x outflow with M8x1
  • Flow rate: 0,20ccm, 0,40ccm, 0,60ccm
  • Pump pressure: min. 15-45 bar

Single line distributor ZEM 353

Single line distributor ZEM 353
  • For oil and semi-fluid grease
  • 3 x outflow with M8x1
  • Flow rate: 0,20ccm, 0,40ccm, 0,60ccm
  • Pump pressure: min. 15-45 bar

Single line distributor ZEM 355

Single line distributor ZEM 355
  • For oil and semi-fluid grease
  • 5 x outflow with M8x1
  • Flow rate: 0,20ccm, 0,40ccm, 0,60ccm
  • Pump pressure: 15-45 bar

Single line distributor ZEM 391

Single line distributor ZEM 391
  • For oil and semi-fluid grease
  • 1 x outflow
  • Flow rate: 0,40ccm, 0,60ccm, 1,00ccm, 1,50ccm
  • Pump pressure: 15-45 bar

Single line distributor ZEM 392

Single line distributor ZEM 392
  • For oil and semi-fluid grease
  • 2 x outflow with M 8x1
  • Flow rate: 0,40ccm, 0,60ccm, 1,00ccm, 1,50ccm
  • Pump pressure: min. 15-45 bar

Single line distributor ZEM 393

Single line distributor ZEM 393
  • For oil and semi-fluid grease
  • 3 x outflow with M8x1
  • Flow rate: 0,40ccm, 0,60ccm, 1,00ccm, 1,50ccm
  • Pump pressure: min. 15-45 bar

Single line distributor ZEM 320 - Plug

Single line distributor ZEM 320 - Plug
  • Lubricant: Oil or semi-fluid grease
  • Pump pressure: 15-35 bar
  • Flow rate per stroke: 0,01 ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Single line distributor ZEM 322 - Plug

Single line distributor ZEM 322 - Plug
  • Lubricant: Oil or semi-fluid grease
  • Pump pressure: 15-35 bar
  • Flow rate per stroke: 0,01ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

 

Single line distributor ZEM 323 - Plug

Single line distributor ZEM 323 - Plug
  • Lubricant: Oil or semi-fluid grease
  • Pump pressure: 15-35 bar
  • Flow rate per stroke: 0,01ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Single line distributor ZEM 324 - Plug

Single line distributor ZEM 324 - Plug
  • Lubricant: Oil or semi-fluid grease
  • Pump pressure: 15-35 bar
  • Flow rate per stroke: 0,01ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Single line distributor ZEM 325 - Plug

Single line distributor ZEM 325 - Plug
  • Lubricant: Oil or semi-fluid grease
  • Pump pressure: 15-35 bar
  • Flow rate per stroke: 0,01ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Single line distributor ZEM 326 - Plug

Single line distributor ZEM 326 - Plug
  • Lubricant: Oil or semi-fluid grease
  • Pump pressure: 15-35 bar
  • Flow rate per stroke: 0,01ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Vogel Single line distributor / Piston distributor series 320

Vogel Single line distributor / Piston distributor series 320
  • Lubricant: Oil and semi-fluid grease
  • Outer thread: M 8x1 oder M 10x1
  • Flow rate per stroke: 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Vogel Single line distributor / Piston distributor series 322

Vogel Single line distributor / Piston distributor series 322
  • Lubricant: Oil and semi-fluid grease
  • Model with bolted connection
  • Flow rate per stroke: 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Vogel Single line distributor / Piston distributor series 323

Vogel Single line distributor / Piston distributor series 323
  • Lubricant: Oil and semi-fluid grease
  • Model with bolted connection
  • Flow rate per stroke: 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Vogel Single line distributor / Piston distributor series 324

Vogel Single line distributor / Piston distributor series 324
  • Lubricant: Oil and semi-fluid grease
  • Model with bolted connection
  • Flow rate: 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Vogel Single line distributor / Piston distributor series 325

Vogel Single line distributor / Piston distributor series 325
  • Lubricant: Oil and semi-fluid grease
  • Model with bolted connection
  • Flow rate per stroke: 0,03ccm, 0,06ccm, 0,10ccm. 0,16ccm

Vogel Single line distributor / Piston distributor series 326

Vogel Single line distributor / Piston distributor series 326
  • Lubricant: Oil and semi-fluid grease
  • Model with bolted connection
  • Flow rate per stroke: 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

Dosing element CJB

Dosing element CJB
  • Oil - dosing system
  • For single lubricating points
  • Flow rate: 0,012 ccm, 0,025 ccm, 0,05 ccm, 0,1 ccm, 0,2 ccm, 0,4 ccm, 0,8 ccm, 0,16 ccm, 0,32 ccm, 0,64 ccm

Dosing element FJB

Dosing element FJB
  • For oil
  • For the single line pump SF-230
  • Screwed connection: Ø 4mm
  • Flow rate: 0,005ccm, 0,01ccm, 0,02ccm, 0,04ccm, 0,08ccm, 0,16ccm, 0,32ccm, 0,64ccm

SKF Dosing heads for single line distributors series 320

SKF Dosing heads for single line distributors series 320
  • For oil and semi-fluid grease
  • Thread M 8x1
  • Flow rate per stroke: 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm

 

Distributor block M8

Distributor block M8
  • Distributor block M8
  • Versions: 2 ports, 3 ports, 4 ports, 5 ports, 6 ports
  • Threaded connection: Input: M10x1, Output: M8x1

SKF Dosing unit series 321-G

SKF Dosing unit series 321-G
  • For oil
  • Model with bolted connection
  • Flow rate per stroke: 0,01ccm, 0,03ccm, 0,06ccm, 0,10ccm

Vogel Dosing unit series 321-L

Vogel Dosing unit series 321-L
  • For oil
  • Model with bolted connection
  • Flow rate per stroke: 0.01, 0.03, 0.06 oder 0.10ccm

SKF Dosing unit series 321-T

SKF Dosing unit series 321-T
  • For oil
  • Model with bolted connection
  • Pipe connectio sizes: Ø 4mm, Ø 6mm
  • Flow rate per stroke: 0.01, 0.03, 0.06 oder 0.10ccm

SKF Dosing unit series 321-W

SKF Dosing unit series 321-W
  • For oil
  • Model with bolted connection
  • Pipe connection sizes: Ø 4mm, Ø 6mm
  • Flow rate per stroke: 0,01cm³, 0,03cm³, 0,06cm³, 0,10cm³

Dosing elements Z31DV

Dosing elements Z31DV
  • For oils and semi-fluid greases
  • Viscosities: 20 - 700 mm²/s
  • Pressure: 15-40 bar
  • Flow rates: 30 mm³/stroke, 50 mm³, 100 mm³, 150 mm³ or 200 mm³/stroke

Dosing elements Z31ZV

Dosing elements Z31ZV
  • For semi-fluid grease and oil
  • Viscosities: 50 - 700 mm²/s
  • Pressure: 15-40 bar
  • Flow rates: 10 mm², 20mm³, 30 mm³, 50 mm³, 100 mm³ or 150 mm³

Single line distributor JSM

Single line distributor JSM
  • Single line distributor JSM
  • DOsage by customer requirement

Metering valve ZMBE

Metering valve ZMBE
  • For oil
  • Flow rate: 0,02ccm, 0,25ccm, 0,06ccm, 0,10ccm, 0,20ccm, 0,30ccm
  • Input M10x1
  • Delivery pressure: min. 14bar - max. 34bar

 

SKF piston distributor 320

SKF piston distributor 320
  • Dosing elements flow rate per stroke: 0.03, 0.06, 0.10 and 0.16ccm
  • Lubricant: Oil and semi-fluid grease
  • Inner thread: M 8x1

SKF piston distributor 342

SKF piston distributor 342
  • Flow rates oil: 0.01, 0.02, 0.03, 0.06, 0.10 or 0.16ccm
  • Flow rates semi-fluid grease: 0.03, 0.06 or 0.10ccm
  • For oil and semi-fluid grease
  • Pressure: min. 12-45 bar

SKF piston distributor 343

SKF piston distributor 343
  • For oil
  • Flow rates: 0,02ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm
  • Pressure: min. 12-45 bar
  • Sealing: Perbunan

SKF piston distributor 345

SKF piston distributor 345
  • For oil
  • Flow rate: 0,02ccm, 0,03ccm, 0,06ccm, 0,10ccm, 0,16ccm
  • Pressure: min. 12 - max. 45 bar
  • Sealing: Perbunan

SKF piston distributor 351

SKF piston distributor 351
  • For oil
  • Flow rate: 0,2ccm, 0,4ccm, 0,6ccm
  • Pressure: min. 15 bar - max. 45 bar
  • Sealing: Viton

SKF piston distributor 351 with plug connection

SKF piston distributor 351 with plug connection
  • For oil
  • With SKF plug connection
  • Flow rate: 0,05 ccm, 0,10 ccm, 0,20 ccm, 0,40 ccm, 0,60 ccm
  • Pressure: min. 15 bar - max. 45 bar

SKF piston distributor 352

SKF piston distributor 352
  • For oil
  • Flow rate: 0,1ccm, 0,2ccm, 0,4ccm, 0,6ccm
  • Pressure: min. 15 bar - max. 45 bar
  • Sealing: Viton

SKF piston distributor 353

SKF piston distributor 353
  • For oil
  • Flow rate: 0,2ccm, 0,4ccm, 0,6ccm
  • Pressure: min. 15-45 bar
  • Sealing: Viton

SKF piston distributor 355

SKF piston distributor 355
  • For oil
  • Flow rate: 0,2ccm, 0,4ccm, 0,6ccm
  • Pressure: min. 15-45 bar
  • Sealing: Viton

SKF piston distributor 391

SKF piston distributor 391
  • For oil
  • Flow rate: 0,4ccm, 0,6ccm, 1,0ccm, 1,5ccm
  • Pressure: min. 15-45 bar
  • Sealing: Viton

SKF piston distributor 392

SKF piston distributor 392
  • For oil
  • Flow rate: 0,4ccm, 0,6ccm, 1,0ccm, 1,5ccm
  • Pressure: min. 15-45 bar
  • Sealing: Viton

SKF piston distributor 393

SKF piston distributor 393
  • For oil
  • Flow rate: 0,4ccm, 0,6ccm, 1,0ccm, 1,5ccm
  • Pressure: min. 15-45 bar
  • Sealing: Viton

Vogel Monoflex distributor 370

Vogel Monoflex distributor 370
  • For oil
  • Available as 2-, 3- or 5-digit relubrication distributor
  • Selective flow rates: 0,05ccm, 0,10ccm, 0,20ccm, 0,40ccm, 0,60ccm, 1,00ccm, 1,50ccm

SKF Piston distributor VKS02

SKF Piston distributor VKS02
  • For semi-fluid grease
  • NLGI class 000, 00 or 0
  • Lubricating point amount: 2
  • Dosing elements flow rate per stroke: 0.1, 0.2 or 0.4ccm

 

Vogel Piston distributor VKS04

Vogel Piston distributor VKS04
  • For semi-fluid grease
  • NLGI class 000, 00 or 0
  • Lubricating points: 4
  • Dosing elements flow rate per stroke: 0,1cm³, 0,2cm³, 0,4cm³

Vogel Piston distributor VKS06

Vogel Piston distributor VKS06
  • For semi-fluid grease
  • NLGI class 000, 00 or 0
  • Lubricating points: 6
  • Dosing elements flow rate per stroke: 0,1cm³, 0,2cm³, 0,4cm³

SKF Dosing fitting VKU for VKU series

SKF Dosing fitting VKU for VKU series
  • Dosing fittings
  • For single line distributors of the VKU series
  • Flow rate: 0.1, 0.2 or 0.4ccm

Vogel Dosing unit, dynamic

Vogel Dosing unit, dynamic
  • Dosing unit, dynamic
  • For oil
  • Viscosity 50 to 1000 mm²/s
  • Dosage 0.01 to 0.2 ccm

SKF Dosing unit for industrial assembly lines

SKF Dosing unit for industrial assembly lines
  • For oil and grease
  • Up to NLGI class 2 (homogenous, w/o air inclusions)
  • Lubricant inlet pressure: 20 to 200 bar
  • Flow rate per outlet: 20 to 600 ccm (depending on model)

 

Details:

Sealing material: NBR.
Limit values for the distributors:
Operating temperature range: 0 to +80°C
Effective oil viscosity:                  5 to 2500 mm²/s.

Show 1 to 54 (of in total 54 products) Sites:  1